3D print Slough railway station
A free, printable 3D model of Slough railway station and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Slough railway station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long, thin station details
Station buildings can carry small details such as roof edges and window frames. Print friendly keeps thin parts sturdy; choose Full detail with a larger print size if you want every feature kept.
- One piece with the ground
Slough railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Slough railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Slough railway station
Slough railway station serves the town of Slough in Berkshire, England. It stands on the Great Western Main Line midway between London Paddington and Reading. Its site is just north of the town center, beside the A4. By rail it is 18.45 miles (29.7 km) from Paddington, with Langley east of it and Burnham west. Its trains are run by Great Western Railway and by the Elizabeth line, and trains on the Windsor branch end their journey at Slough.
The Great Western Railway's first stretch, between Paddington and Maidenhead, opened on June 4, 1838. Trains stopped at Slough without a station, and passengers bought tickets at the Crown Inn. The Act that authorized the railway banned stations closer than 3 miles (4.8 km) to Eton College unless the school agreed. Once the relevant clauses were repealed, the first proper station opened on June 1, 1840. Queen Victoria made her first railway journey from Slough in 1842, and later a branch line ran to Windsor & Eton Central for her convenience.
The present station, 220 yards (200 m) west of the old one, replaced it on September 8, 1884. Slough became, at least for a time, the Royal Station, and the station is much larger and grander than others in the area to suit that role. Its approach road, Mackenzie Street, was far wider than usual to take the Queen's carriages and entourage. In 1845 a telegraph message sent ahead to Paddington helped in the arrest of a murderer who had boarded a train here, believed to be the first such use of the telegraph.
About this model
Slough railway station is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
