3D print Smeaton's Tower
A free, printable model of Smeaton's Tower, its lantern room and the grassy lawn and paths around it in Plymouth, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Smeaton's Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 22 m
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
22 m of Smeaton's Tower, 6 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tapering tower
The tower narrows as it rises to a balcony and lantern room. Print slowly with good cooling so the upper section stays clean, and use a layer height of 0.12-0.16 mm.
- Small lantern and finial
The glazed lantern and the tiny finial on top are the finest parts. Print friendly adapts them to the print scale; Full detail keeps them, which suits larger prints.
- One piece with the ground
Smeaton's Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Smeaton's Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Smeaton's Tower
Smeaton's Tower, on Plymouth Hoe in Plymouth, Devon, is a memorial to the civil engineer John Smeaton, made from the rebuilt top part of the third Eddystone Lighthouse he designed. The lighthouse marked a big advance in lighthouse design. It served from 1759 to 1877, until the ledge beneath it eroded and forced new construction.
Smeaton, born in Yorkshire in 1724, is regarded as the father of civil engineering. He began by designing the lighthouse to resemble an oak tree, a shape that made it strong. He also revived hydraulic lime, a cement the Romans used, which can set under water, and joined granite blocks with dovetail joints and marble dowels. Building started in 1756 and finished in August 1759. It stood 72 feet (22 m) high, 26 feet (8 m) across at the base and 17 feet (5 m) across at the top.
Its 24 candles were first lit on October 16, 1759, and oil lamps replaced them from 1810. In 1882 the upper part was taken down and re-erected as a memorial on Plymouth Hoe, replacing a triangular obelisk that Trinity House had built there as a navigation aid. The Mayor of Plymouth opened the site to the public on September 24, 1884. What remains of the old tower, its foundation and a stub, stands on the Eddystone Rocks. The tower on the Hoe has held Grade I listed status since 1954.
About this model
Smeaton's Tower is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





