3D print Ardvreck Castle
A free, printable model of the ruined Ardvreck Castle on its grassy headland beside the water of Loch Assynt, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ardvreck Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Jagged ruined wall tops
Broken, uneven wall tops and thin wall sections are the delicate parts. Print friendly adapts them to the print scale; Full detail keeps every break, which suits a larger print.
- Small fragments around the base
A few low wall stubs sit around the foot of the ruin. A layer height of 0.12-0.16 mm keeps the stepped edges clean, and a bigger print size keeps the small pieces.
- One piece with the ground
Ardvreck Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ardvreck Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ardvreck Castle
Ardvreck Castle is a ruin on a rocky headland jutting into Loch Assynt, in Sutherland, Scotland. It dates from about 1490 and is linked to the Macleods of Assynt, then the landowners. It took over from Assynt Castle, which lay four miles (six kilometers) northwest of Inchnadamph.
In 1650, after the Battle of Carbisdale, James Graham, 1st Marquess of Montrose, a royalist, was delivered here to the Covenanters by the Laird of Assynt, MacLeod. The full story is unclear. One account says that MacLeod, who was loyal to the Covenanters, arrested Montrose as he fled, tired out; another says he gave him comfortable shelter but betrayed him for a reward of £25,000. In 1672 Clan Mackenzie attacked and captured the castle, after which the clan controlled the Assynt lands, and they built a newer manor house close by, Calda House, in 1726.
A fire destroyed Calda House in 1737; it and Ardvreck Castle are ruins, both scheduled monuments. The castle was a plain rectangular keep with a round stair tower at its south-east corner. The upper floors were corbelled out to form square rooms, and the three compartments on the ground floor were all vaulted. It appears to have had four floors and several gunports.
About this model
Ardvreck Castle is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





