A white 3D print of Chester railway station, a long, low building with small towers and a platform canopy beside a wide bundle of railway tracks, surrounded by streets and houses.

3D print Chester railway station

A free, printable model of Chester railway station, its long façade and platform canopies, with the tracks and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Chester railway station model, North view North
  • Chester railway station model, East view East
  • Chester railway station model, South view South
  • Chester railway station model, West view West

© OpenStreetMap contributors

The model you print

Chester railway station in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:4,063

5 mm tall on a 160 mm print

Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Small towers along the façade

    Small turreted towers punctuate the long front. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print or a fine nozzle.

  2. Long, low and arcaded

    The station is long and low, with arches along its wall and canopies beside the tracks. A bigger print size keeps the arches readable, and a layer height of 0.12–0.16 mm keeps their edges crisp.

  3. One piece with the ground

    Chester railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Chester railway station takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Chester railway station

Chester railway station, in the Newtown district, serves Chester, a city in Cheshire, England. Its architect was Francis Thompson, and in 1848 it began operating as a station shared by several companies. Between 1875 and 1969 it was called Chester General, which kept it distinct from Chester Northgate. The National Heritage List for England records it as Grade II* listed.

Before 1848, two stations faced each other across Brook Street. By 1845 four railway companies had lines ending at Chester, so a joint station was proposed, and the companies agreed to share the cost of land and buildings. Robert Stephenson was the engineer, C. H. Wild assisted Thompson, and Thomas Brassey built it. Its foundation stone went down in August 1847, and the station opened on August 1, 1848.

The station was laid out with one very long platform used mainly for departing trains, flanked by long and short bay platforms and covered by a train shed on cast iron columns. The Venetian-style front, 320 m (1,050 ft) long, is dark red brick trimmed with stone and ornamented with sculpture by John Thomas. A fifteen-bay, two-storey entrance block sits in the middle, with taller turreted sections beside it and arcaded screen walls ending in lower towers.

About this model

Chester railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits