3D print Smolenice Castle
A free, printable model of Smolenice Castle, its towers, wings and curtain wall, and the wooded slope around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Smolenice Castle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Pointed towers and turrets
The castle has several cone-roofed towers and small turrets. Print slowly with good cooling, and use Print friendly unless you print larger, where Full detail keeps every tip.
- Battlements and fine windows
The curtain wall and wings carry small battlement teeth and rows of windows. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
Smolenice Castle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Smolenice Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Smolenice Castle
Smolenice Castle rises on the Little Carpathians' eastern slope, close to the town of Smolenice in Slovakia. Dating from the 15th century, it was destroyed in the Napoleonic Wars and in Rákóczi's War of Independence. Count János Pálffy inherited it in 1777 but never lived there, because of its poor condition and a lack of money for rebuilding.
Rebuilding did not happen until the 20th century, ordered by Count József Pálffy. Jozef Hubert drew up the new castle's design with Kreuzenstein castle near Vienna as his model, and Pavol Reiter, an architect from Bavaria, supervised the works. Italian, German, Austrian and Hungarian masters took part, together with 60 workmen from Smolenice and the villages around it. The main building, made of ferroconcrete, has two wings and a tower.
Damage came in the spring of 1945, and the state took ownership that same year. Reconstruction work followed after 1950. The castle has belonged, from June 26, 1953 onward, to the Slovak Academy of Sciences; it serves as a conference center.
About this model
Smolenice Castle is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
