3D print South Schraalenburgh Church
A free, printable model of South Schraalenburgh Church, a church with a tall spire at one end of its long nave, on open grass near a road, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower and spire
The tower and spire at the end of the church are its slenderest parts. Print slowly with cooling for the tip; Print friendly adapts the thin point to the print scale.
- One piece with the ground
South Schraalenburgh Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. South Schraalenburgh Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About South Schraalenburgh Church
South Schraalenburgh Church, also called South Presbyterian Church, was founded in 1723 in Bergenfield, in Bergen County, New Jersey. It began as a Dutch Reformed church, set up as an alternative place of worship because the nearest church was in Hackensack.
Its square sanctuary was completed in 1728, and a new sanctuary followed in 1799. In 1801, opposing elements within the congregation split off to found the North Schraalenburgh Reformed Church. The congregation joined the Presbyterian Church in 1913 and took the name South Presbyterian Church.
About this model
South Schraalenburgh Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
