A white 3D print of St. John's Cathedral, a long Gothic church with buttresses, a domed west tower and a crossing tower, set among dense surrounding buildings.

3D print St. John's Cathedral ('s-Hertogenbosch)

A free, printable model of St. John's Cathedral, its towers, buttresses and rounded apse, among the dense streets and rooftops around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • St. John's Cathedral ('s-Hertogenbosch) model, North view North
  • St. John's Cathedral ('s-Hertogenbosch) model, East view East
  • St. John's Cathedral ('s-Hertogenbosch) model, South view South
  • St. John's Cathedral ('s-Hertogenbosch) model, West view West

© OpenStreetMap contributors

The model you print

St. John's Cathedral ('s-Hertogenbosch) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
73 m
On a 160 mm print
20 mm
Scale
1:3,750

73 m of St. John's Cathedral ('s-Hertogenbosch), 20 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Buttresses and pinnacles

    Rows of flying buttresses, small pinnacles and a ring of apse chapels wrap the church. Full detail keeps every modeled buttress for large prints; Print friendly adapts these thin parts to the print scale.

  2. Domed tower tops

    The west tower and the crossing tower end in small domes and lanterns. Layers of 0.12 to 0.16 mm keep their curves crisp, and printing slowly with good cooling helps the lantern tips.

  3. One piece with the ground

    St. John's Cathedral ('s-Hertogenbosch) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. John's Cathedral ('s-Hertogenbosch) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About St. John's Cathedral ('s-Hertogenbosch)

St. John's Cathedral (Sint-Janskathedraal) is the Catholic cathedral of 's-Hertogenbosch in North Brabant, where it serves as the bishop's seat. It is regarded as the biggest cathedral in the Netherlands and among Europe's finest examples of Brabantine Gothic architecture. A small Romanesque parish church for St. John, commissioned by Henry I, Duke of Brabant, is thought to have been started on the same spot in 1220.

In 1340 work began to replace that church entirely with a Gothic building. The outer choir aisles and apse chapels came first, then the transept and choir in 1450, and construction was finished around 1525. The bases of the old Romanesque towers were kept, and with budget constraints the nave ended up shorter than planned. A fire in 1584 destroyed the organ, most of the roof and the central tower; a cupola later took the tower's place.

The cathedral is 115 meters (377 ft) long and 62 meters (203 ft) wide, with a five-aisled nave. Its tower, a remnant of the first church, reaches 73 meters (240 ft), the tallest for any Catholic church in the Netherlands. It holds the honorary title Basilica Minor. A restoration that started in 1998 ran until 2010 and cost more than 48 million euro.

About this model

St. John's Cathedral ('s-Hertogenbosch) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits