A white 3D print of St. Mark's Church, with a tall bell tower topped by a small dome and a patterned roof, surrounded by closely packed buildings and narrow streets.

3D print St. Mark's Church, Zagreb

A free, printable model of St. Mark's Church with its bell tower and patterned roof, set among the tightly packed buildings and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • St. Mark's Church, Zagreb model, North view North
  • St. Mark's Church, Zagreb model, East view East
  • St. Mark's Church, Zagreb model, South view South
  • St. Mark's Church, Zagreb model, West view West

© OpenStreetMap contributors

The model you print

St. Mark's Church, Zagreb in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slim cupola and spike on the tower

    The bell tower ends in a small dome with a thin spike. Print slowly with good cooling for that tip; Print friendly thickens it for the print scale, while Full detail keeps it as modeled.

  2. Patterned roof and coat of arms

    The roof carries a fine zigzag tile pattern with two raised shields on the south slope. A layer height of 0.12 to 0.16 mm keeps them crisp, and a larger print size shows them more clearly.

  3. One piece with the ground

    St. Mark's Church, Zagreb is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Mark's Church, Zagreb takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About St. Mark's Church, Zagreb

St. Mark's Church serves as the parish church for old Zagreb, on St. Mark's Square, in Zagreb's Upper Town. It ranks among the oldest architectural monuments in the city, and its beginnings go back to the 13th century. The strongest signs of that early start are a Romanesque window in the south facade and the rounded floor plan of St. Mary's chapel. In the 14th century's second half, a radical reconstruction turned it into a late Gothic church with three naves. Because of its Gothic and Romanesque architecture, it is registered among the Cultural Goods of Croatia.

Its most distinctive features are the medieval architecture and a colorful tiled roof. The tiles form the arms of Zagreb, a white castle on a red field, next to the arms of the Triune Kingdom (Croatia, Slavonia and Dalmatia). Inside, thick round columns carry heavy ribbed stone vaults. The south portal, the most valuable part of the church, is attributed to the Parler family of sculptors from Prague, and it holds fifteen effigies in eleven shallow niches.

Many changes followed. A radical renovation between 1878 and 1882, to designs by F. Schmidt of Vienna and Hermann Bolle, gave the church a neo-Gothic character, and its glazed-tile roof dates from that era. A later restoration, done by 1937, mostly stripped that neo-Gothic layer away and emphasized the structural beauty of the Gothic church, with stone and bronze pieces by Ivan Meštrović added inside.

About this model

St. Mark's Church, Zagreb is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Zagreb

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits