3D print St. Paul's Basilica
A free, printable model of St. Paul's Basilica and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
St. Paul's Basilica in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Bell tower detail
A bell tower is usually a slim vertical part of a church. Print it slowly with good cooling, and try a layer height of 0.12–0.16 mm to keep its edges clean.
- One piece with the ground
St. Paul's Basilica is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. St. Paul's Basilica takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About St. Paul's Basilica
No Roman Catholic congregation in Toronto is older than St. Paul's Basilica. Its home is 83 Power Street, in Toronto's Corktown neighborhood just east of downtown, close to where Queen and Parliament streets cross. James Baby set up the parish in 1822, when the Town of York belonged to the Diocese of Kingston. The original church was finished in 1824 on the site the church still occupies; it was built of red brick in Gothic Revival style.
A Romanesque Revival building by Joseph Connolly, which opened in 1889, now houses the church. Its design is based on the Saint Paul Outside the Walls basilica in Rome, and the building was needed for a growing congregation. The Italianate campanile (bell tower) from 1905 holds the bell from the original church. In 1999 Pope John Paul II named the church a minor basilica.
About this model
St. Paul's Basilica is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
