3D print Stade Bollaert-Delelis
A free, printable model of the stadium and the roads, grassy slopes and houses around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Stade Bollaert-Delelis
Lens, France, has Stade Bollaert-Delelis as its main football stadium, and RC Lens is based there. It was built in 1933 and has a capacity of 38,223. It was first named for Félix Bollaert, who was a director of the Compagnie des Mines de Lens and was keen to promote the city's sports clubs. Building started in 1931, but Bollaert died shortly before the inauguration. In 2012 the stadium was renamed after André Delelis, the former mayor of Lens, following his death.
It is an English-style stadium with four separate stands, each dedicated to a person: Henri Trannin, Tony Marek, Élie Delacourt and Max Lepagnot. The Marek stand, a side stand, is considered the kop, and its supporters are regarded as the most fervent in the stadium. Fans also sing the song Les corons at the end of the halftime break. The film Bienvenue chez les Ch'tis includes a scene of the stadium, filmed at a Lens–Nice match in April 2007.
The stadium has hosted matches at five major international tournaments: the 1984 European Championship, the 1998 FIFA World Cup, the 1999 Rugby World Cup, the 2007 Rugby World Cup and the 2016 European Championship. Before the 2016 tournament it was closed for renovations during the 2014–2015 season. In 2012 it also staged a rugby league game between France and Wales.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 21 mm | 1:3,750 |
| 200 mm | 26 mm | 1:3,000 |
| 256 mm | 34 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Tall masts and angled cables
- Thin masts with angled stays rise at the corners, the most delicate parts of the model. Print slowly with good cooling, and Print friendly adapts the thinnest ones to the print scale.
- Open lattice roof trusses
- Lattice trusses run along the stand roofs. Full detail keeps every strut, which suits a larger print or a fine nozzle, and layers of 0.12 to 0.16 mm keep them crisp.
- One piece with the ground
- Stade Bollaert-Delelis is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stade Bollaert-Delelis takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Stade Bollaert-Delelis is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Stade Bollaert-Delelis STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Stade Bollaert-Delelis grows with the print: about 21 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
