3D print the Stade de la Beaujoire
A free, printable model of the roofed stadium around its pitch, with the green grounds, ring roads and nearby buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Stade de la Beaujoire
Stade de la Beaujoire – Louis Fonteneau stands in Nantes, France, and is the home ground of FC Nantes, a French football club nicknamed the canaries. It was built as the city's second stadium and took over from the Marcel-Saupin stadium as the club's base. The club's owners picked Berdje Agopyan as architect, and he had also designed the Parc des Princes in Paris in the 1970s. From the council's approval in June 1982 to completion took almost three years.
The first match, on May 8, 1984, was a friendly in which FC Nantes faced Romania before 30,000 fans. The stadium carries the name of Louis Fonteneau, who served as FC Nantes president from 1969 to 1986. Its original capacity was 52,923. Renovation work in 1998 prepared it for the FIFA World Cup, and in that year it became an all-seater stadium. The highest attendance was 51,359, for a France versus Belgium match in 1984.
La Beaujoire was a venue at UEFA Euro 1984, where France beat Belgium 5–0 with three goals from Michel Platini, and it staged six matches at the 1998 FIFA World Cup, among them the Brazil versus Denmark quarter-final. It has also held international rugby union matches, including group-stage games of the 2007 and 2023 Rugby World Cups, and men's and women's football at the 2024 Paris Olympics. The venue stages music concerts too.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 11 mm | 1:3,750 |
| 200 mm | 14 mm | 1:3,000 |
| 256 mm | 18 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Slender pillars under the roof
- A ring of thin pillars carries the stands and roof. Print friendly adapts thin columns to the print scale, while Full detail keeps every pillar on larger prints or with a fine nozzle.
- Wide overhanging roof edge
- The roof reaches out past the stands all the way round. Layers of 0.12 to 0.16 mm keep the roof edge and rows of stands crisp, and a larger print size keeps more detail.
- One piece with the ground
- The Stade de la Beaujoire is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Stade de la Beaujoire takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Stade de la Beaujoire is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Stade de la Beaujoire STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Stade de la Beaujoire grows with the print: about 11 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
