3D print Stade de la Mosson
A free, printable model of Stade de la Mosson, its open stands and floodlight masts, and the parkland, a stream and streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Stade de la Mosson
Stade de la Mosson, in Montpellier, France, is a football ground and the home of Montpellier HSC, with room for 32,900 spectators. It once held 16,000 spectators, but was entirely rebuilt in 1998 so it could stage 6 games at the 1998 FIFA World Cup. The name comes from the Mosson river nearby.
Other big tournaments came later. It staged group stage matches at the 2007 Rugby World Cup. At the FIFA Women's World Cup of 2019, one of nine venues, it hosted four group games and a Round of 16 match. In 2013 it staged a Heineken Cup semi-final between Clermont and Munster, played on April 27.
On June 9, 2012, the Catalans Dragons played Wigan Warriors there in a Super League fixture, the first rugby league at the ground. Heavy rain hit Montpellier in October 2014, over 30 centimeters (12 inches) of it, and the stadium flooded twice, damaging the stadium and pitch and moving 5 of the club's fixtures to the Altrad Stadium until repairs were done.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 16 mm | 1:3,750 |
| 200 mm | 20 mm | 1:3,000 |
| 256 mm | 25 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Open stands and roof frames
- The stands show many slim columns and roof trusses. Print friendly thickens the thinnest parts; a bigger print or Full detail keeps more of the frame.
- Tall floodlight masts
- The slim masts at the corners are the most fragile parts. Print slowly with cooling, and use 0.12–0.16 mm layers for clean vertical detail.
- One piece with the ground
- Stade de la Mosson is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stade de la Mosson takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Stade de la Mosson is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Stade de la Mosson STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Stade de la Mosson grows with the print: about 16 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
