3D print Stade Geoffroy-Guichard
A free, printable model of the roofed stadium with its four stands around the pitch, with the wide roads and large buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Stade Geoffroy-Guichard
Stade Geoffroy-Guichard, in Saint-Étienne, France, is a stadium used mostly for football and also for rugby union. Home to AS Saint-Étienne, it goes by the nicknames "le Chaudron" (the Cauldron) and "l'enfer vert" (the Green Hell), alluding to the colors of the local team. It opened on September 13, 1931, and takes its name from Geoffroy Guichard, who founded the Casino retail group and bought the site where it was built.
Construction began in 1930, with funding from Saint-Étienne, answering a subscription that Pierre Guichard, Geoffroy's son, had launched. The original stadium came from Étienne Thierry Meyer and Michael Saidoun, both architects, and had a pitch encircled by a 400m running track, plus a stand of 1,000 seats, for a total capacity of about 1,800 people. The athletics track was removed in 1956, bringing supporters closer to the pitch, and in 1965 floodlights on four towers, 60 meters in height, were installed.
For Euro 1984 the stadium gained fifteen thousand seats and a rebuilt roof, and Michel Platini scored a hat-trick there in a match between France and Yugoslavia. Major work followed in 1996 to 1998 to meet FIFA standards, and the renovated stadium opened on May 12, 1998. The stadium has also been a venue at the 2003 FIFA Confederations Cup, UEFA Euro 2016 and the 2007 Rugby World Cup.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 10 mm | 1:3,750 |
| 200 mm | 13 mm | 1:3,000 |
| 256 mm | 16 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Slim roof struts and supports
- Thin struts and supports hold the roof edges around the stands. Print friendly adapts them to the print scale, Full detail keeps them for a larger print, and layers of 0.12–0.16 mm keep them crisp.
- One piece with the ground
- Stade Geoffroy-Guichard is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stade Geoffroy-Guichard takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Stade Geoffroy-Guichard is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Stade Geoffroy-Guichard STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Stade Geoffroy-Guichard grows with the print: about 10 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
