A white 3D print of Strängnäs Cathedral, a long church with a tall square tower topped by a domed hood and lantern, in a green churchyard with paths and surrounding buildings.

3D print Strängnäs Cathedral

A free, printable model of Strängnäs Cathedral, a long church with a tall tower under a domed hood, and the green grounds and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Strängnäs Cathedral model, North view North
  • Strängnäs Cathedral model, East view East
  • Strängnäs Cathedral model, South view South
  • Strängnäs Cathedral model, West view West

© OpenStreetMap contributors

The model you print

Strängnäs Cathedral in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
75 m
On a 160 mm print
22 mm
Scale
1:3,750

75 m of Strängnäs Cathedral, 22 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Tall tower with a domed hood

    The tower ends in a domed hood with a small lantern and a thin cross. Print friendly adapts that thin tip to the print scale; Full detail keeps it and suits a larger print. Printing slowly helps the tall tower.

  2. One piece with the ground

    Strängnäs Cathedral is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Strängnäs Cathedral takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Strängnäs Cathedral

Strängnäs Cathedral, a Lutheran cathedral church in Sweden, stands in the town of Strängnäs, and since the Protestant Reformation it has been the cathedral of the Church of Sweden's Diocese of Strängnäs. Construction began in about 1260, the cathedral was inaugurated in 1291, and further additions followed in the 1300s and 1400s. The core church was completed in 1330, and a sacristy, towers and lateral choirs were added later in the Middle Ages.

The cathedral is mostly brick, in the Scandinavian Brick Gothic style, and its Baroque-style tower hood dates from 1723. The original church was wooden, probably dating to the early 12th century. It stood where pagan rituals used to be held, and where the missionary Saint Eskil had been killed in the mid 11th century. A church of stone and brick replaced it in 1240, shortly after Strängnäs became a diocese.

Inside, the nave, chancel and sanctuary follow tradition, and a very large triptych reredos dominates the high altar at the eastern end. Two of its side chapels have been redone in a contemporary style. The cathedral holds the tombs of Sten Sture the Elder, Gustaf Otto Stenbock, Charles IX of Sweden and Maria of Palatinate-Simmern. Its library traces its origin to 1316 and is among the oldest surviving libraries in Sweden that is still working.

About this model

Strängnäs Cathedral is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits