A white 3D print of the Suleymaniye Mosque in Rhodes, with a large central dome, a row of small domes over a columned portico and a tall minaret, among tightly packed houses.

3D print the Suleymaniye Mosque (Rhodes)

A free, printable model of the Suleymaniye Mosque in Rhodes, with its domes, portico and tall minaret, among the closely packed old-town houses and lanes, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Suleymaniye Mosque (Rhodes) model, North view North
  • Suleymaniye Mosque (Rhodes) model, East view East
  • Suleymaniye Mosque (Rhodes) model, South view South
  • Suleymaniye Mosque (Rhodes) model, West view West

© OpenStreetMap contributors

The model you print

Suleymaniye Mosque (Rhodes) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
10 mm
Scale
1:3,750

10 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender minaret

    The minaret is tall and thin, with two balconies and a pointed cap. Print it slowly with good cooling, and choose Full detail on a larger print to keep the balconies; Print friendly adapts them to smaller prints.

  2. Row of small portico domes

    Small domes line the portico in front of the main dome, over a sloped roof on thin columns. A layer height of 0.12–0.16 mm and a bigger print size keep the little domes and columns distinct.

  3. One piece with the ground

    The Suleymaniye Mosque (Rhodes) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Suleymaniye Mosque (Rhodes) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Suleymaniye Mosque (Rhodes)

The Suleymaniye Mosque, or Mosque of Suleiman, no longer serves as a mosque; it stands in the city of Rhodes, in Greece's South Aegean region. It was the first mosque in the town, raised around 1522–1523 after the Ottomans captured Rhodes in the siege of 1522, and it takes its name from Sultan Suleiman, who led the invasion. Local tradition says it stands where a church once stood. Of the Ottoman-era monuments that survive in Rhodes, it is the most significant.

In 1808 the mosque was rebuilt to the same design as the original. The 1856 earthquake damaged it, and that year lightning struck a gunpowder store beneath the nearby Church of Saint John, setting off an explosion that harmed it further. Its minaret, first built with one balcony, was later rebuilt with two; it was demolished in 1987 over structural problems. A major restoration ran from 1988 to 2005, and in 2006 Europa Nostra awarded it an honorary distinction.

The prayer hall joins three domed rooms: a central room under a large, high dome, flanked by two rooms with smaller, lower domes. In front is a double narthex, whose inner portico carries seven domes on eight columns and whose outer portico has a sloped lead roof. The ornate marble entrance arch came from a funerary monument that the Knights Hospitaller built in 1510–1520 and was moved here in 1863.

About this model

The Suleymaniye Mosque (Rhodes) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits