Ta' Pinu in 3D
Ta' Pinu appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Ta' Pinu may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 61 m
- On a 160 mm print
- 17 mm
- Scale
- 1:3,750
61 m of Ta' Pinu, 17 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall slim bell tower
The square bell tower with its spire and cross is the tallest, thinnest part of the model. Print slowly with good cooling, and choose Print friendly for small prints or Full detail for large ones.
- Round windows and small dome
Round windows run along the side walls and a small domed lantern sits on the roof. A 0.12 mm layer height keeps these round details crisp, and a larger print keeps the finest ones.
- One piece with the ground
Ta' Pinu is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Ta' Pinu takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Ta' Pinu
Ta' Pinu is both a Roman Catholic minor basilica and a national shrine to Our Lady of Ta' Pinu, on Gozo, which is Malta's sister island. It is about 700 m (2,300 ft) outside the village of Għarb. Its origins are unknown: the older chapel was first recorded when Bishop Domenico Cubelles visited it, and by then it had just been rebuilt.
In 1575 a visitor sent by the pope, Pietro Dusina, found the chapel in very poor condition and ordered it closed and pulled down. At the start of the demolition, the first blow broke the workman's arm, a sign taken to mean the chapel should stay. It was the sole chapel on the island that outlasted Dusina's decree. In 1598 Pinu Gauci became its procurator, and the chapel was renamed "Ta' Pinu", having been "Of the Gentile" before.
Work on the new church began on May 30, 1920, and it was consecrated on August 31, 1932, in the neo-romantic style. The interior has 6 mosaics and 76 colored windows, and the bell tower stands 61 m high. On May 26, 1990, Pope John Paul II said mass on the shrine's parvise during his visit to Gozo.
About this model
Ta' Pinu is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





