3D print Hiiu Stadium
A free, printable model of Hiiu Stadium's covered stand with the pitch, grass and the nearby road and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Hiiu Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 2 mm
- Scale
- 1:3,750
2 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A thin roof on slim posts
The modeled stand has a wide flat roof held up by slender posts. "Print friendly" adapts thin parts to the print scale, while "Full detail" keeps every post on a large print.
- Very small at print scale
The stand is low and small next to the pitch, so a larger print keeps more of its rows of benches. A 0.12–0.16 mm layer height helps fine detail.
- One piece with the ground
Hiiu Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Hiiu Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Hiiu Stadium
Hiiu Stadium, a football ground in Tallinn, Estonia, sits in the Nõmme district roughly 8 km to the southwest of the city center, at Pidu tänav 11. It opened in 1936 and serves as the home of Nõmme Kalju FC. The City of Tallinn owns it.
Construction began in 1930, when Nõmme Kalju needed a larger sports ground than its old field on Tähe and Rahu streets. The club's chairman Hugo Sepp started the project, and the footballers themselves did much of the work. The official opening took place in 1936.
Hiiu Stadium went through a complete renovation in 2002, costing 8 million Estonian kroon. In 2006 a third-generation turf took the place of the old artificial turf, and a new administration building was built with a stand holding 300 people. A record attendance of 2,730 was set on September 10, 2011, when Nõmme Kalju hosted FC Flora Tallinn.
About this model
Hiiu Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
