3D print TD Station
A free, printable model of TD Station, its broad ribbed roof and the roads and low buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About TD Station
In uptown Saint John, New Brunswick, Canada, stands TD Station, an arena once known as Harbour Station. The Saint John Sea Dogs, a team in the Quebec Maritimes Junior Hockey League, play there. The Saint John Flames of the American Hockey League were based there from 1993 until 2003. From 2011 to 2019 the Saint John Riptide, who played in the National Basketball League of Canada, also called it home.
Its opening came in October 1993 with a gala followed by an Aerosmith concert that over 7,000 people attended. Elton John broke that record in 2008, bringing in 8,100 fans. It stands on former harbor land, on the site of the city's former Union Station, a passenger rail terminal. Trains of both CNR and CPR used the station until it was torn down in the early 1970s for the Saint John Throughway. The arena's name partly comes from that station.
Seating at TD Station is on two levels, called the upper bowl and the lower bowl, and there is an open concourse. It holds 6,307 seats for hockey games and 6,603 for basketball games, and concert capacity ranges from 1,400 to around 8,100. Toronto-Dominion Bank became its sponsor in 2019, and the arena took the name TD Station in place of Harbour Station.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 8 mm | 1:3,750 |
| 200 mm | 9 mm | 1:3,000 |
| 256 mm | 12 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Broad ribbed roof
- The roof is a broad, shallow curve with fine ribs, and the entrance fronts have small projecting details. Print friendly merges the finest of them; Full detail keeps them at larger sizes.
- One piece with the ground
- TD Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. TD Station takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
TD Station is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a TD Station STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. TD Station grows with the print: about 8 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
