3D print the Temple of Debod
A free, printable model of the Temple of Debod, a low stone temple standing in a Madrid park, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the temple large
The temple is a small, low structure, so it gains most from a larger print. Print slowly and choose Full detail to keep its edges crisp.
- Layers for straight walls
Long, flat wall faces show layer stepping across their whole length. Layers of 0.12–0.16 mm and a slower print keep those faces even.
- One piece with the ground
The Temple of Debod is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Temple of Debod takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Temple of Debod
The Temple of Debod is an ancient Nubian temple that stands in Madrid. It was first built in the early 2nd century BC in Egypt, 15 km (9.3 mi) to the south of Aswan, near the Nile's first cataract and the religious center at Philae, which was dedicated to the goddess Isis. Adikhalamani, the Kushite king of Meroë, began the work with a small single-room chapel to the god Amun.
Kings of the Ptolemaic dynasty later extended the chapel on all four sides into a small temple 12 by 15 m (39 by 49 ft) dedicated to Isis of Philae, and its expansion was completed under the Roman emperors Augustus and Tiberius. Its pronaos had four columns with composite capitals; it collapsed in 1868 and is lost.
When the Aswan High Dam threatened monuments along the Nile, the Egyptian state gave the temple to Spain in 1968 in thanks for Spanish help in saving the Abu Simbel temples. It was taken apart, moved and rebuilt in a park in Madrid near the Royal Palace, opening to the public in 1972, with its gateways put back in a different order from the original. Few works of ancient Egyptian architecture stand outside Egypt, and in Spain it is the only example.
About this model
The Temple of Debod is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
