3D print The Den
A free, printable model of The Den and the streets and buildings of south Bermondsey around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Stands around the pitch
The stadium is low and wide, so most of the model lies in its plan. Print friendly adapts the thin edges of the stands to the print scale; a larger print keeps the tiers apart.
- Crisper vertical edges
Stand walls and the blocks around the ground show layer stepping most plainly. Layers of 0.12 to 0.16 mm keep those vertical faces clean.
- One piece with the ground
The Den is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Den takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Den
The Den, once known as The New Den, is Millwall Football Club's ground: an all-seater stadium in southeast London, within the New Cross and Bermondsey area. A South London railway line that starts at London Bridge runs beside it, and the Old Den, the ground it replaced, lay a quarter of a mile away; the changeover came on September 30, 1993. The site had earlier held housing, a church and the playgrounds known as the Senegal Fields.
Millwall's chairman Reg Burr judged that the Old Den could not be turned into an all-seater ground, and in 1990 announced a relocation to Senegal Fields in south Bermondsey. The result was England's first new all-seater stadium finished after the Taylor Report into the Hillsborough disaster of 1989, planned so that spectators could leave quickly by short, direct routes. Early plans allowed for 25,000 to 30,000 seats; the club waited instead, and settled at a little over 20,000.
The stadium cost £16 million, and John Smith, then the Labour leader, opened it on August 4, 1993 before a friendly against Sporting CP that the visitors won 2–1. No new ground for a professional club had gone up in London since 1937. Capacity is 20,146, all seated. Three stands carry names from the club's history: the Dockers Stand, the Cold Blow Lane Stand — after the road that led into the Old Den — and the Barry Kitchener Stand, named for Millwall's longest-serving player. A 1994 boxing match, the 2006 FA Women's Cup Final and four internationals have also been staged here.
About this model
The Den is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
