3D print The Red Apple
A free, printable model of The Red Apple on Wijnhaven Island, with the surrounding Rotterdam streets, water and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 124 m
- On a 160 mm print
- 33 mm
- Scale
- 1:3,750
124 m of The Red Apple, 33 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall, narrow tower
The tower is much taller than it is wide. A slower print with good cooling helps keep the tall faces clean, and 0.12 to 0.16 mm layers hold the vertical detail.
- Detail for the tower
The model rises as a narrow mass. Print friendly adapts small details to the scale; Full detail is better for a large print or a finer nozzle.
- One piece with the ground
The Red Apple is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Red Apple takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About The Red Apple
The Red Apple is a 40-story residential tower on Wijnhaven Island in Rotterdam, Netherlands. It reaches 124 meters (407 ft) and was designed by KCAP Architects & Planners with Jan des Bouvrie. The tower contains 121 residential units. The complex also includes a separate lower building and a car park.
The main structure was topped out in 2008, and the project was completed in 2009. A multi-story car park with 338 spaces serves the complex, and the entire development has an open fiber network. The ground floor is intended for shops and restaurants, and the development combines housing, offices, parking and retail. The Kopblok is a separate building of 53 meters (174 ft), adding 79 apartment units and offices.
About this model
The Red Apple is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
