3D print the Tianjin Radio and Television Tower
A free, printable model of the Tianjin Radio and Television Tower and the water and shoreline around its base, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tianjin Radio and Television Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 415 m
- On a 160 mm print
- 111 mm
- Scale
- 1:3,750
415 m of the Tianjin Radio and Television Tower, 111 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very thin antenna mast
A slim mast with small collars rises above the pod. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep it crisp.
- Slender tapering shaft
The long shaft narrows to a thin neck under the round pod. "Print friendly" adapts thin parts to the print scale, while larger prints keep more of the shape.
- One piece with the ground
The Tianjin Radio and Television Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tianjin Radio and Television Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tianjin Radio and Television Tower
Tianjin, China, has a tall tower used mainly for communication, and it is known as the Tianjin Radio and Television Tower. It measures 415.2 meters (1,362 ft) in height. Among the freestanding towers of the world, it ranks 8th in height.
It dates from 1991, when it was built for $45 million. Roughly two-thirds of the way up, an observation pod provides 253 square meters of floor space (about 2,720 sq ft), mostly for communication equipment. The tower belongs to the World Federation of Great Towers.
About this model
The Tianjin Radio and Television Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
