3D print the Tianjin World Financial Center
A free, printable model of the Tianjin World Financial Center and the river, roads and towers around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tianjin World Financial Center in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 337 m
- On a 160 mm print
- 91 mm
- Scale
- 1:3,750
337 m of the Tianjin World Financial Center, 91 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine vertical ribs
The tapering shaft is covered in many thin vertical ribs. A larger print and a 0.12–0.16 mm layer height keep them distinct; "Print friendly" adapts them to the print scale.
- Open crown at the top
The top ends in a thin open frame with a spiked edge. Print slowly with good cooling, and use "Full detail" on a large print to keep every point.
- One piece with the ground
The Tianjin World Financial Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tianjin World Financial Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tianjin World Financial Center
The Tianjin World Financial Center, also known as Tianjin Tower or Jin Tower, is a modern supertall skyscraper. It rises from the banks of the Hai River in Tianjin, China, in the Heping District. This mixed-use tower measures 336.9 meters (1,105 ft). Its observation deck stands 305.2 meters (1,001 ft) up, and the building has 4 floors below ground and 74 above.
Jangho Group made the glass unitized curtain wall, which covers 215,000 m2. The tower was the first office building in Tianjin fitted with double-decker elevators. On January 14, 2010, it reached its full height, and it opened on March 6, 2011. Financial Street Holding owns the building, and JLL serves as joint sales and leasing agent.
About this model
The Tianjin World Financial Center is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
