3D print the Tombul Mosque
A free, printable 3D model of the Tombul Mosque, shown with its minaret, a low building of small domes, nearby roads and green slopes, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Tombul Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender minaret
The tall, thin minaret is the most delicate part of the model. Print slowly with good cooling, and choose Print friendly to adapt it or Full detail on a larger print.
- Many small domes
The main dome and the cluster of small domes beside it are curved details; layer heights of 0.12–0.16 mm keep their shapes smooth.
- One piece with the ground
The Tombul Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Tombul Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Tombul Mosque
The Tombul Mosque (its official name is the Sherif Halil Pasha Mosque) is in Shumen, in Shumen Province, Bulgaria. As Bulgaria's largest mosque, it is also among the biggest in the Balkans. Taken together with the buildings around it, it tops the country for size and architectural significance. In 1975 it gained national-importance cultural monument status.
Construction began in 1740 during the Ottoman era, financed by Şerif Halil Pasha, a native of the village of Madara, 17 kilometers (11 mi) east of Shumen. The mosque was originally in the town center, but it now stands in the southwestern part of Shumen as the town grew. The dome's round shape gave the mosque its name.
The mosque complex covers 1,730 square meters (18,600 sq ft) and has a prayer hall, a sahn and an extension of twelve rooms once used as a madrasa boarding house. The prayer hall rises from a square plan of 15 by 15 meters (49 by 49 ft) through an octagon to a circle, under a spherical dome 25 meters (82 ft) high. The minaret is 40 meters (130 ft) high.
About this model
The Tombul Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





