3D print the Vienna Volksoper
A free, printable 3D model of the Vienna Volksoper and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Vienna Volksoper in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Choose detail for your print size
Print friendly adapts thin parts and small details to the print scale, while Full detail keeps every modeled feature. Pick Full detail for a large print or a fine nozzle.
- One piece with the ground
The Vienna Volksoper is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Vienna Volksoper takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Vienna Volksoper
The Vienna Volksoper, whose name means People's Opera, is a house for opera in Vienna, Austria. The season lasts from September to June, and across it the house stages three hundred performances drawn from twenty-five productions spanning opera, operetta, musicals and ballet. It went up in 1898 under the name Kaiserjubiläum-Stadttheater, or Kaiser's Jubilee Civic Theatre, and at first staged only plays. Construction took just 10 months, and the first director, Adam Müller-Gutenbrunn, began with debts of 160,000 florins.
The theater declared bankruptcy in 1903. Rainer Simons became the new head of the house on September 1, 1903, and gave it the name Kaiserjubiläum-Stadttheater - Volksoper, intending to keep staging plays but also to establish opera and operetta. Vienna first saw Tosca in 1907 and Salome in 1910 at the Volksoper. Singers including Maria Jeritza and Richard Tauber performed there. After the Second World War it served as an alternative venue while the Vienna State Opera lay devastated.
In 1987 the building appeared in the James Bond film The Living Daylights, standing in for a fictional "People's Conservatory" in Bratislava, though the interior scenes were filmed at Sofiensaal. Between September 1991 and June 1996 the Volksoper and the Vienna State Opera were run under joint, collective management. In 1999 it became a wholly owned subsidiary of the Bundestheater-Holding.
About this model
The Vienna Volksoper is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
