Winchester Mystery House in 3D
The Winchester Mystery House appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Winchester Mystery House may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Many small gables and turrets
The roofline is crowded with pointed turrets, gables and a small lookout structure. Print friendly adapts these to the print scale; Full detail keeps them on a larger print.
- A low, sprawling shape
The model is wide and low. A larger print size and a 0.12-0.16 mm layer height keep the many roof pitches distinct.
- One piece with the ground
The Winchester Mystery House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Winchester Mystery House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Winchester Mystery House
The Winchester Mystery House is a large mansion in San Jose, California, once the home of Sarah Winchester, whose late husband William Wirt Winchester was a firearms magnate. In 1886 she bought a 45-acre ranch near San Jose that came with a two-story, eight-room farmhouse, and she named it Llanada Villa. Rather than keep her architects, she planned the expansion herself, designing rooms one at a time and borrowing ideas from the world's fairs of the day.
She had a habit of rebuilding, or abandoning, work that fell short of what she wanted, and the result was a maze-like design. A report from 1897 said a seven-story tower was taken down and put up again 16 times. Exterior windows and doors that were walled off remain from the house's growth, and up to five levels rose over different parts of the home. The style is mainly Victorian, with Gothic and Romanesque touches.
At her death in 1922 the count stood at 160 rooms, 2,000 doors and 10,000 windows, along with 47 stairways and 47 fireplaces, plus 13 bathrooms and 6 kitchens. At its largest it held roughly 500 rooms. The 1906 San Francisco earthquake did severe damage; the seven-story tower and most chimneys fell. The house opened to tourists nine months after she died.
About this model
The Winchester Mystery House is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline




