3D print Yankee Stadium
A free, printable model of Yankee Stadium and the Bronx streets, buildings and parkland around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Yankee Stadium
Yankee Stadium is a baseball stadium in the Bronx, New York City, where Major League Baseball's New York Yankees play. It opened in April 2009 and replaced the original Yankee Stadium, which operated from 1923 to 2008. It stands in the Bronx's Concourse neighborhood on the former site of Macombs Dam Park, a 24-acre (9.7 ha) plot a block to the north of the old stadium's location. Among the 30 major league ballparks, only four have a larger seating capacity.
Populous designed the stadium to echo the original, down to the exterior and the trademark frieze, while adding larger spaces and modern amenities. About 11,000 limestone pieces from Indiana, plus granite and pre-cast concrete, make up the exterior, and the limestone comes from the quarry that supplied the Empire State Building. Seating spreads outward in a bowl instead of the stacked tiers of the old stadium, and about two-thirds of it is in the lower bowl. The stadium seats 46,537 fans, and up to 52,325 when standing room is counted for baseball games.
Construction began with a groundbreaking on August 16, 2006. Of its $2.3 billion cost, $1.2 billion came from public subsidies, and few stadiums have cost more. The Yankees won the 2009 World Series in their first season there, and the World Series came back to the stadium in 2024. Its other events include college football, among them the annual Pinstripe Bowl, and concerts.
How it prints
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 16 mm | 1:4,375 |
| 200 mm | 21 mm | 1:3,500 |
| 256 mm | 26 mm | 1:2,734 |
-
North
-
East
-
South
-
West
- Arched details on the wall
- A row of small arched recesses runs around the lower wall. Print friendly adapts them to the print scale; Full detail keeps them on larger prints or with a fine nozzle.
- Smooth ring, open middle
- The stadium is a wide ring around an open field, with a smooth sloping bowl inside. Layers of 0.12 to 0.16 mm keep that slope clean, and a larger print shows the bowl and rim more clearly.
- One piece with the ground
- Yankee Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Yankee Stadium takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Yankee Stadium is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Yankee Stadium STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Yankee Stadium grows with the print: about 16 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
