3D print Mount Fuji and the Yoshida Trail
Mount Fuji on one print, with the Yoshida Trail raised in orange on the terrain. Open it in the generator, change the size or colors, and export a slicer-ready 3MF.
Yoshida Trail
- Side
- North, from Fujiyoshida
- Climb
- Five to seven hours from the fifth station
- On the print
- 18 km, as mapped in OpenStreetMap
3,776 m of mountain, 31 mm on your shelf
The print covers 28 by 28 km. On a 160 mm print the summit stands 31 mm above the valleys.
- Taller than life
The print opens with the Elevation multiplier at 1.5, so the mountain stands 1.5 times its true height and its shape reads clearly at this size. Set it to 1 for true scale.
- The trail
The Yoshida Trail prints as a raised 1.2 mm orange line, drawn from its OpenStreetMap route. Give it its own filament color, or turn it off on the GPX tab.
- Colors
Forest, meadow, bare rock, ice and water each get their own color where the land has them, so a multi-color printer shows where the trees give way to rock.
About Mount Fuji
Mount Fuji is an active stratovolcano on the island of Honshu, with a summit 3,776 m (12,389 ft) above sea level, the highest mountain in Japan. It stands about 100 km (62 mi) southwest of Tokyo and last erupted in 1707–08.
Its exceptionally symmetrical cone is what makes it such a good print: the slopes sweep down evenly on every side, with the crater at the top.
The Yoshida Trail
The Yoshida route on the north side is the most popular of the four main routes to the summit. Most climbers start at a fifth station, which buses and cars can reach, and take five to seven hours to climb to the summit, the tenth station.
The route also starts from the foot of the mountain, and the print draws its ascent from OpenStreetMap from Fujiyoshida up to the crater.
Next to the others
How Mount Fuji measures up
Common questions
Is the Mount Fuji 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Is the Yoshida Trail on the print?
Yes. Print this mountain adds it from its OpenStreetMap route (18 km as mapped) and raises it on the terrain. The footprint is 28 by 28 km, centered on the summit and wide enough for all of it.
Is the mountain printed at its true height?
It starts at 1.5 times its true height, about 31 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale, or higher for a more dramatic model.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
