3D print Mount Kosciuszko and the Kosciuszko Summit Walk
Mount Kosciuszko on one print, with the Kosciuszko Summit Walk raised in orange on the terrain. Open it in the generator, change the size or colors, and export a slicer-ready 3MF.
Kosciuszko Summit Walk
- Start
- Charlotte Pass
- Length
- About 9 km (7.6 km road, then 1.4 km path)
- Rawson Pass
- 2,100 m
- On the print
- 9.3 km, as mapped in OpenStreetMap
2,228 m of mountain, 39 mm on your shelf
The print covers 14 by 14 km. On a 160 mm print the summit stands 39 mm above the valleys.
- Taller than life
The print opens with the Elevation multiplier at 2, so the mountain stands 2 times its true height and its shape reads clearly at this size. Set it to 1 for true scale.
- The trail
The Kosciuszko Summit Walk prints as a raised 1.2 mm orange line, drawn from its OpenStreetMap route. Give it its own filament color, or turn it off on the GPX tab.
- Colors
Forest, meadow, bare rock, ice and water each get their own color where the land has them, so a multi-color printer shows where the trees give way to rock.
About Mount Kosciuszko
Mount Kosciuszko is the highest mountain of mainland Australia, at 2,228 metres (7,310 ft). It stands on the Main Range of the Snowy Mountains in Kosciuszko National Park, New South Wales.
The land around it is high and rolling rather than sharp, so the print raises it twice its true height to bring out the ridges and valleys.
The Kosciuszko Summit Walk
From Charlotte Pass, the old summit road is open to walkers and cyclists for 7.6 km (5 mi) to Rawson Pass, at 2,100 m. A 1.4 km path leads on from there to the summit.
The print draws this walk from OpenStreetMap. The summit can also be reached from the top of the Thredbo chairlift, joining the same path at Rawson Pass.
Next to the others
How Mount Kosciuszko measures up
Common questions
Is the Mount Kosciuszko 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Is the Kosciuszko Summit Walk on the print?
Yes. Print this mountain adds it from its OpenStreetMap route (9.3 km as mapped) and raises it on the terrain. The footprint is 14 by 14 km, centered on the summit and wide enough for all of it.
Is the mountain printed at its true height?
It starts at 2 times its true height, about 39 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale, or higher for a more dramatic model.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
