3D print Allianz Stadion
A free, printable model of the Allianz Stadion in Hütteldorf, Vienna, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A wide, low ground
The stadium prints wide and low, so most of the model sits close to the base and its outer edges carry the shape. Print slowly with steady cooling, and 0.12 to 0.16 mm layers keep those edges clean.
- One piece with the ground
Allianz Stadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Allianz Stadion takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Allianz Stadion
Allianz Stadion, a football ground in Vienna's Hütteldorf neighborhood, is where SK Rapid Wien plays at home, and the club owns it. It occupies the site once used by the Gerhard Hanappi Stadium. For international matches it uses the sponsorless name Weststadion, Western Stadium, taken from its position in the city.
Chelsea came for a pre-season friendly on July 16, 2016, the match that served as the official unveiling. The first competitive fixture came on July 23, 2016, against SV Ried, in the opening round of the Austrian Football Bundesliga. The first competitive goal there came from Christoph Schößwendter, and Rapid won 5–0.
About this model
Allianz Stadion is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
