3D print the Austrian Parliament Building
A free, printable model of the Parliament Building on the Ringstraße, with the surrounding streets and buildings of central Vienna, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Columns and a long roofline
A Greek Revival front lives on straight vertical lines, and columns and roof edges are the first things to soften in a small print. Print at 200 mm or larger, and keep layers at 0.12 to 0.16 mm.
- One piece with the ground
The Austrian Parliament Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Austrian Parliament Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Austrian Parliament Building
The Austrian Parliament Building is where the two houses of Austria's parliament meet. It stands on the Ringstraße, in Innere Stadt, Vienna's first district, close to Hofburg Palace and to the Palace of Justice. The building was put up for the legislature of the Austrian half of the Austro-Hungarian Empire, the Imperial Council, whose two chambers it housed, and it is the seat of their successors, the National Council and the Federal Council. Theophil Hansen designed it in the Greek Revival style and also handled the interior decoration, down to statues, paintings, furniture and chandeliers.
Work began in 1874 with the laying of the foundation stone, and the building was finished in 1883. An Imperial Commission decided that the style should be classical, arguing that Greek architecture suited a parliament, and chose Hansen's plan, drawing on his drafts for the Zappeion Hall in Athens. Emperor Franz Joseph gave Hansen the title of Freiherr (Baron) after the building was finished. It covers more than 13,500 square meters, some 145,300 sq ft, and holds over a hundred rooms. That makes it one of the biggest buildings on the Ringstraße.
The Pallas Athena fountain stands before the main entrance; Carl Kundmann built it from Hansen's plans between 1898 and 1902, and it counts among the city's most notable attractions. Important state ceremonies take place in the building, including the swearing-in of the president of Austria, and some parliamentary offices have spilled into nearby buildings, among them the Palais Epstein. Heavy damage in World War II destroyed parts of the interior, and most of the interior has since been returned to its original splendor. It reopened in 2023 after five years of renovations.
About this model
The Austrian Parliament Building is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
