3D print Clarke Stadium
A free, printable 3D model of Clarke Stadium and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Clarke Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Grandstand and field lines
Grandstand rows and a flat field are fine detail that can blur at small sizes. A fine layer height of 0.12–0.16 mm helps keep the rows distinct, and a larger print size preserves more small details.
- One piece with the ground
Clarke Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Clarke Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Clarke Stadium
Clarke Stadium is a multipurpose stadium in Edmonton, Alberta, Canada. It was first built in 1938 for Canadian football, and it carries the name of Joseph Clarke, the mayor of Edmonton. The land had been deeded to the city by the federal government for building public sports fields. The original stadium held approximately 20,000 fans, with two grandstands on opposing sidelines and end-zone stands added years later.
The Edmonton Eskimos (since renamed the Elks) called it home from 1949 to 1978. They then relocated to Commonwealth Stadium, constructed alongside for the 1978 Commonwealth Games. The old stadium was almost completely torn down on June 1, 2000, and a secondary stadium for the 2001 World Championships in Athletics, held in Edmonton, replaced it. The new version had about 1,200 seats in one grandstand and an artificial turf surface.
FC Edmonton began playing North American Soccer League home games there with the 2012 season. Temporary seating raised capacity to 5,000 in May 2013, artificial turf was ready for 2014, and a renovation before the 2019 CPL season brought seating to 5,148, with permanent stands behind both goals. The grounds can hold more than 6,000 for concerts and other non-sporting events.
About this model
Clarke Stadium is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
