3D print El Sadar Stadium
A free, printable model of El Sadar, a rectangular stadium whose roof ring rakes back to a crest above a colonnade, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Raking roof ring and seams
The roof is a faceted skirt that rakes back from the outer wall to a crest, divided by fine standing seams. Print friendly adapts the seams at print scale; Full detail keeps them for a larger print.
- Lettering on the outer wall
Tall thin lettering spans the pale, vertically ribbed wall above the colonnade. It sits near the limit of what the model can show, so print larger or at Full detail to give it a chance.
- One piece with the ground
El Sadar Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. El Sadar Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About El Sadar Stadium
El Sadar is a football ground in Pamplona, Navarre, Spain, and home to Osasuna. It replaced the San Juan stadium, sold the year before, and opened on September 2, 1967, the occasion being a game between Real Zaragoza and the Portuguese club Vitoria de Setúbal that finished one-all. The name comes from a river nearby; from 2005 to 2011 the ground was called Reyno de Navarra, after its sponsor, the Government of Navarre.
At its opening the stadium held 25,000 spectators, only 7,000 of them seated. Osasuna's first game there came the following day and ended in a 3-0 win over Vitoria de Setúbal, with Osaba scoring the club's first goal at El Sadar in the 28th minute. The capacity has moved several times since: in the summer of 2015 security work cut it from 19,800 to 18,375, and later expansion brought it to 23,576.
Work started in late 2019 and finished in early 2021. An extra tier went on the three smaller stands and into the corners, rising almost to the height of the grandstand; 1,300 rail seats were fitted at the south end; and a fresh roof went over the ring of stands, with external cladding in coordinated colors, along with a club museum. The work was hoped to be finished for Osasuna's centenary, and the bill came to around €21 million against an original €16 million.
About this model
El Sadar Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
