3D print Energizer Park
A free, printable model of Energizer Park, a rectangular stadium with a thin flat canopy, with the streets and buildings of downtown St. Louis around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Energizer Park in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin canopy and open concourse
The model has two steep seating tiers under thin, separate roof plates, with slender columns and an open concourse. Print friendly adapts the thin plates and columns; Full detail keeps them on a larger print.
- Video board and corner screens
A framed video board interrupts the north stand, with smaller screens at the corners. A layer height of 0.12–0.16 mm keeps their frames crisp.
- One piece with the ground
Energizer Park is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Energizer Park takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Energizer Park
Energizer Park is a stadium built for soccer in St. Louis, Missouri, with 22,423 seats. It is where St. Louis City SC of Major League Soccer plays, and MLS Next Pro side St. Louis City 2 also uses the ground. The stadium stands next to Union Station in the Downtown West neighborhood.
Completed in November 2022, the stadium was ready in time for the 2023 MLS season. Centene Corporation, a healthcare company, acquired the naming rights in 2022, but the agreement was rescinded later that year and the club announced CityPark as the new name. Energizer's agreement took effect in 2025.
The ownership group sought no public funding for the stadium, and the plan called for private funding and team ownership. In 2016, MLS began looking for a downtown site for a soccer-specific stadium, and a later proposal went to a public vote in April 2017. Voters defeated the proposal 53 to 47 percent.
About this model
Energizer Park is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
