3D print the Estádio António Coimbra da Mota
A free, printable model of Estádio António Coimbra da Mota, with its stepped terrace beside the pitch, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Estádio António Coimbra da Mota in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A single east terrace
This model covers only the eastern stand, a long stepped terrace with a low rear booth. Print friendly keeps the treads readable at small sizes; a larger print preserves the open viewing slots and fence posts.
- One piece with the ground
The Estádio António Coimbra da Mota is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Estádio António Coimbra da Mota takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Estádio António Coimbra da Mota
Estádio António Coimbra da Mota serves Estoril, Portugal, as a multi-use ground. It is used mostly for football matches, and G.D. Estoril Praia uses it as its home ground. A capacity of 8,000 is listed, but only 5,094 seats can be used, since the upper north stand is shut to the public because of structural defects in its foundations.
On March 30, 2011, the Nascente Stand's northern section partially collapsed, leaving a crater exposed by ground subsidence; the area is crossed by the Ribeira da Amoreira canal. On January 15, 2018, the same stand was at risk of collapsing, and the area was evacuated. The match was halted at half-time, the second half took place on February 21, 2018, and the stand has stayed shut, so only two stands are available.
Before UEFA Euro 2004, the Swedish national team trained at the ground. Portugal lost 0–2 to Cape Verde there on March 31, 2015, then beat Cyprus 4–0 on June 3, 2017. Portuguese youth fixtures and rugby union internationals have also been played at the stadium. A women's friendly between Portugal and the United States took place on November 8, 2018.
About this model
The Estádio António Coimbra da Mota is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
