3D print the Estadio Carlos Tartiere
A free, printable model of Estadio Carlos Tartiere, with a roof ring, cable gantries and corner towers around an open pitch, among surrounding buildings and generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Estadio Carlos Tartiere in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Cable gantries and roof ring
Fourteen raised gantries stand along the roof ring, with cable fans running inward over the open bowl. Print friendly adapts the thin gantries and cables; Full detail keeps them on a large print.
- Corner towers and end trusses
Four banded corner towers and tall open end trusses rise around the seating tiers. A 0.12–0.16 mm layer height and a bigger print keep the open steelwork legible.
- One piece with the ground
The Estadio Carlos Tartiere is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Estadio Carlos Tartiere takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Estadio Carlos Tartiere
Oviedo, in Spain, has this multi-use stadium. Its 30,500 seats make it the biggest ground in Asturias. The present building replaced an earlier stadium of the same name from 1932, which was named for Carlos Tartiere, the club's first president. Real Oviedo play their home games there.
Work started with the first stone on June 18, 1998. The ground's first fixture, on September 17, 2000, was a Primera División meeting between Real Oviedo and Las Palmas. On September 20, 2000, a friendly with FK Partizan marked the official opening. Spain's senior team has appeared there three times, and the ground has also welcomed the country's under-21 side and the Asturian autonomous team.
Critics have faulted the siting, which lacks adequate access and emergency exits for big crowds, and a pitch that is difficult to keep in its damp, shaded conditions. Wide openings in the concrete facade make the ground cold, while gray dominates the seating and the outer walls. Emilio Llano, one of the architects, defended the design and suggested the trouble might lie in the grass rather than the ground beneath it.
About this model
The Estadio Carlos Tartiere is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
