3D print the Estadio Corona
A free, printable model of the Estadio Corona and the surrounding streets and buildings of Torreón, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Estadio Corona in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Four slender light masts
The model's four light towers rise above an open bowl. Print friendly adapts their slim lattice supports; Full detail keeps the lamp frames on a larger print or a fine nozzle.
- Curved canopy over the main stand
A thin arched canopy covers the tall west stand, with open terraces opposite. Print slowly with good cooling for the mast tops, and 0.12 to 0.16 mm layers keep the canopy edge and seating steps crisp.
- One piece with the ground
The Estadio Corona is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Estadio Corona takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Estadio Corona
Estadio Corona is a football ground in Torreón, Coahuila, Mexico. It is the home ground of Liga MX side Santos Laguna, was completed in 2009, and sits within the Territorio Santos Modelo, a larger club complex. Its standard capacity is 30,000, with room for 20,000 at special events, and the ground replaced an earlier stadium of the same name.
That earlier Estadio Corona was built in 1970 and held 18,000 spectators. The new stadium cost US$100 million and was designed by HKS. Its inauguration took place on November 11, 2009, with Santos Laguna playing Santos FC. Pelé gave the opening kickoff, and a concert by Ricky Martin preceded the event.
About this model
The Estadio Corona is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
