3D print Estadio de Bata
A free, printable model of Estadio de Bata, an oval stadium with stepped stands and a ring roof raised on slim supports, with the surrounding streets, houses and green areas, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Estadio de Bata in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ring roof on slim supports
A wide roof ring sits over the stands on many thin supports. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print.
- Dense stand rows
The two tiers of stands are cut into many narrow rows. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.
- One piece with the ground
Estadio de Bata is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Estadio de Bata takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Estadio de Bata
In Bata, Equatorial Guinea, Estadio de Bata serves many uses. The Chinese contractor Covec built it and finished the work in 2007, with room for 22,000 people on a single tier built of pre-cast concrete. It served as a venue for the Women's African Football Championship of 2008. It sits roughly 5 km away from the coast and is the largest stadium in the country's largest city.
The stadium is arranged around a football field and running track, with a square center section and semi-circular ends. The first phase added a concrete lower tier of 21 rows plus a steel cantilever roof above the east and west stands. The 2012 Africa Cup of Nations brought a 2011 expansion: Bouygues added a steel upper tier of 13 seat rows and a new, continuous cantilever roof, lifting capacity to 35,000. The stadium staged the opening ceremony and the semi-finals.
In November 2014 the Confederation of African Football named Equatorial Guinea as last-minute alternate hosts of the 2015 Africa Cup of Nations. Four matches were played at Bata Stadium, among them the final and the opener, Equatorial Guinea against the Republic of the Congo.
About this model
Estadio de Bata is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
