A white 3D print of the Estadio La Rosaleda, a two-tier bowl with a roofed stand on one side, a row of leaning fins on the other and open ends, on a base of surrounding streets and buildings.

3D print the Estadio La Rosaleda

A free, printable model of the Estadio La Rosaleda in Málaga, a two-tier bowl with a trussed roof on one side and leaning concrete fins opposite, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Estadio La Rosaleda model, North view North
  • Estadio La Rosaleda model, East view East
  • Estadio La Rosaleda model, South view South
  • Estadio La Rosaleda model, West view West
On a 160 mm print
9 mm
Scale
1:3,750

9 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Lattice truss under the roof edge

    The main stand's roof carries a deep lattice truss and a row of floodlights along its leading edge. Those members are thin; 0.12–0.16 mm layers and Full detail keep the diagonals apart.

  2. Leaning fins on the east side

    A row of slim white blades leans out from the facade opposite the roofed stand. They need a fine nozzle, or Print friendly, to stay separate at the default print size.

  3. One piece with the ground

    The Estadio La Rosaleda is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Estadio La Rosaleda takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Estadio La Rosaleda

La Rosaleda, in Málaga in southern Spain's Andalusia region, is a football ground whose name translates as The Rose Garden. Málaga CF plays at home here in La Liga; before that the ground belonged to CD Málaga, the club whose heir Málaga CF is. Atlético Malagueño, the club's subsidiary, had it as a habitual pitch while in the second division.

It replaced Baños del Carmen, the historic arena. La Rosaleda came into use on April 13, 1941, when flooding pushed a CD Málaga–AD Ferroviaria fixture there. The official inauguration followed on September 14, 1941, with a friendly against Sevilla, the match at which CD Málaga first played under its new name; it had been CD Malacitano.

It seats 30,778, the 18th-largest capacity in Spain and 4th in Andalusia. La Rosaleda was among seventeen grounds that staged the 1982 FIFA World Cup, three matches in all, and it has also held seven Spain national team matches. The Costa del Sol Trophy, organized each year by the club with the municipality, is played here, and the bowl has been used for concerts too.

About this model

The Estadio La Rosaleda is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print