3D print the Estádio Nacional Mané Garrincha
A free, printable model of the Estádio Nacional Mané Garrincha in Brasília, a stadium with a flat roof disc, an open center and a ring of columns, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:4,375
14 mm tall on a 160 mm print
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- The ring of slender columns
A dense ring of slim concrete columns carries the roof above the raised esplanade. They are the finest repeated parts; a larger print or Full detail keeps every shaft clean.
- Roof dish and cable ridges
The membrane dips inside a flat ring, ridged by radial cables and crossed by circumferential seams, with an open center. Layers of 0.12–0.16 mm keep those ridges visible.
- One piece with the ground
The Estádio Nacional Mané Garrincha is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Estádio Nacional Mané Garrincha takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Estádio Nacional Mané Garrincha
Brasília's Estádio Nacional Mané Garrincha serves as both football ground and multipurpose arena, in the Distrito Federal, and it is one of the structures that make up the Ayrton Senna Sports Complex. It opened in 1974 with room for 45,200 people, and Ícaro de Castro Mello was its original architect. A reconstruction between 2010 and 2013 raised capacity to 72,788, leaving only the Maracanã larger among Brazilian grounds and putting the stadium among the biggest in South America.
Re-inauguration came on May 18, 2013, after work done ahead of the 2013 FIFA Confederations Cup and the 2014 World Cup, and it hosted seven matches of that World Cup, including the third-place playoff. The name honors Mané Garrincha (1933–1983), the Brazilian footballer who won the World Cup in 1958 and 1962.
The project was completed for US$900 million, when the original budget had been US$300 million. That made it the third most costly football stadium in the world, after Wembley Stadium and Tottenham Hotspur Stadium in England. The ground has been owned by a company called Arena BSB since December 2019.
About this model
The Estádio Nacional Mané Garrincha is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
