3D print Fir Park
A free, printable model of Fir Park's South Stand in Motherwell, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Fir Park in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Two tiers under one canopy
The model is the South Stand alone, with two raked tiers under a wide canopy. Print friendly adapts the thin seat rows and end-screen framing; Full detail keeps the FIR PARK seating mosaic for a larger print.
- Slow down for the end walls
The tall end walls carry fine corrugated cladding. Use 0.12–0.16 mm layers and a slower speed so the cladding and canopy fascia stay crisp.
- One piece with the ground
Fir Park is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Fir Park takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Fir Park
Fir Park is a football stadium in Motherwell, North Lanarkshire, Scotland. Motherwell, a Scottish Premiership club, plays its home games there, and Gretna used the ground temporarily during the 2007–08 SPL season. The club itself dates from 1886 and had earlier grounds on Roman Road and at Dalziel Park; Fir Park opened in 1895.
Lord Hamilton of Dalzell owned the wooded land where the ground was built, and his racing colors were claret and amber. Motherwell adopted those colors. A crowd of 35,632 watched the replay against Rangers in the 1951–52 Scottish Cup, and Motherwell then went on to win that competition.
The ground has been all-seater since the 1990s and holds 13,677 people. It has an unbalanced look: one large stand contrasts with three smaller structures, one of them not extending the full length of the pitch. The playing surface drops roughly 6 feet (1.8 m) between its east and west sides.
About this model
Fir Park is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
