3D print Heini-Klopfer-Skiflugschanze
A free, printable model of the Heini-Klopfer-Skiflugschanze, its long inrun, and the mountain slope around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Heini-Klopfer-Skiflugschanze in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 24 mm
- Scale
- 1:3,750
24 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long thin inrun
The inrun is a long, slim ramp held up by thin supports, with railings at the top. Print slowly with good cooling, and use Print friendly unless you print larger, where Full detail keeps the railings.
- Cantilevered tower deck
A flat deck reaches out over two tall piers near the base. A layer height of 0.12–0.16 mm keeps its edges crisp, and a bigger print size keeps the small railing details.
- One piece with the ground
Heini-Klopfer-Skiflugschanze is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Heini-Klopfer-Skiflugschanze takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Heini-Klopfer-Skiflugschanze
Oberstdorf, Germany, is home to the Heini-Klopfer-Skiflugschanze, also known as the Heini Klopfer Ski Flying Hill. Opened in 1950, it took its present name from its architect, Heini Klopfer, at a later date. In all, 21 world records have fallen on the hill. Another hill, the Schattenberg ski jumping hill, lies about 7 kilometers (4.3 mi) to the north, also in Oberstdorf, and is a separate venue.
In 1949, the question was whether to enlarge the existing Schattenbergschanze or to build an entirely new hill with its calculation point at K120. Sepp Weiler, Toni Brutscher and Heini Klopfer, three ski jumpers, chose a new hill and found a location for it. They took inspiration from Planica and hoped to outdo the Bloudkova velikanka in Slovenia, then the leading record hill. Construction began in July and was done in five months, on December 10.
On February 28, 1950, during the first Ski Flying Week, Willi Gantschnigg, an Austrian ski jumper, set the first official world record there, at 124 meters (408 feet). The record then went up through the following years, reaching 144 meters (472 feet) when Nilo Zandanel jumped in 1964.
About this model
Heini-Klopfer-Skiflugschanze is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
