3D print Henryk Reyman Municipal Stadium
A free, printable model of the Henryk Reyman Municipal Stadium, with its four curved stands and tall lighting ladders, among the surrounding streets and buildings of Kraków.
-
North
-
East
-
South
-
West
The model you print
Henryk Reyman Municipal Stadium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Lighting ladders and masts
Five tall lighting ladders rise above each side stand, and thinner mast stays cross the end roofs. Print friendly adapts these slender parts; if you keep Full detail, print slowly with good cooling so they stay straight.
- Four curved roofs
Four shallow curved canopies sit over the stands, with open frames beneath and a round media pavilion at one corner. Layers of 0.12 to 0.16 mm keep the roof curves and the pavilion's mullions crisp.
- One piece with the ground
Henryk Reyman Municipal Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Henryk Reyman Municipal Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Henryk Reyman Municipal Stadium
The Henryk Reyman Municipal Stadium is a football ground in Kraków, Poland, and the stadium where Wisła Kraków plays. It has 33,326 seats, all of them seated and covered by a roof. A resolution of the Kraków City Council in 2008 named it for Henryk Tomasz Reyman, a legendary player for the club.
The ground was first built in 1953 and opened in May that year beside the club's older stadium, as the third home in Wisła's history. Between 2003 and 2011 the ground was rebuilt, adding four new stands plus a media pavilion, and the work finished in October 2011.
The ground is rated UEFA Category 4. Floodlight masts went up in 1972, and the new grandstand opened in March 1998, when Wisła played GKS Katowice in the league. The first match with all four redeveloped stands open came on October 15, 2011, when Wisła beat Jagiellonia Białystok 3–1.
About this model
Henryk Reyman Municipal Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
