3D print the Church of St. Adalbert, Kraków
A free, printable model of the Church of St. Adalbert in Kraków, a small domed church at the corner of a large open square, among Old Town buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Church of St. Adalbert, Kraków in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A small church in a big square
The church is a small building beside a large open square, so its dome is tiny at the default size. Choose a larger print size and a 0.12–0.16 mm layer height to keep the dome and small details.
- One piece with the ground
The Church of St. Adalbert, Kraków is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of St. Adalbert, Kraków takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of St. Adalbert, Kraków
The Church of St. Adalbert, also known as the Church of St. Wojciech, stands where the Main Market Square meets Grodzka Street in Old Town, Kraków. It is among the oldest stone churches in Poland, and its almost 1000-year history reaches back to the start of Polish Romanesque architecture. It occupies the south-eastern corner of the market square, which was laid out in 1257, so the church is nearly a century older than the square.
The church dates from the 11th century and takes its name from the martyred missionary Saint Adalbert. The oldest relics show a wooden structure from the end of the 10th century, followed by a stone church whose walls survive in the lower parts. The plaza level rose between 2 and 2.6 meters, so the walls were raised in the 17th century, covered with stucco and topped with a new Baroque dome. Major Baroque reconstruction took place in 1611–1618.
The interior is cramped compared with the larger exterior, and the floor lies below the present level of the square. A 19th-century restoration led to the discovery of the Romanesque past, and a Romanesque portal and stone step survive on the south side. The Archaeological Museum has turned the crypt into a small museum about the history of the market square.
About this model
The Church of St. Adalbert, Kraków is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





