3D print the Niedersachsenstadion
A free, printable model of the Niedersachsenstadion in Hanover, with its stadium bowl and surrounding streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Roof ring and stands
The stadium reads as a bowl with a ring of roof over the stands. Print friendly adapts the thinnest roof edge and small details; Full detail keeps them, which suits a larger print.
- One piece with the ground
The Niedersachsenstadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Niedersachsenstadion takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Niedersachsenstadion
The Niedersachsenstadion is a football stadium in Hanover, in the German state of Lower Saxony, and the home of Hannover 96, a club in the 2. Bundesliga. The original stadium held 86,000 people and was completed in 1954. It has since been rebuilt several times and has 49,000 covered seats.
Construction ran from 1952 to 1954. Rubble from Hanover homes wrecked in World War II went into the stadium's foundations, and construction cost 4 million Deutschmark. It opened on September 26, 1954, and Hannover 96 moved there permanently in 1959. The ground has also hosted international matches, league championship games and DFB-Pokal finals.
The stadium was a venue for the 1974 FIFA World Cup, the 1988 European Championship and the 2006 FIFA World Cup, when it became FIFA World Cup Stadium, Hanover. A redevelopment in 2003–04 by Schulitz & Partner reduced the capacity to 49,951, including around 8,000 standing places, and added a roof of ETFE that lets sunlight through to the pitch.
About this model
The Niedersachsenstadion is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
