A white 3D print of the Pakhtakor Central Stadium, an open oval bowl with four lattice floodlight towers and a low glazed pavilion along one side, on a base of surrounding streets and buildings.

3D print the Pakhtakor Central Stadium

A free, printable model of the Pakhtakor Central Stadium, an open oval bowl with four corner floodlight towers, and the surrounding streets and buildings of Tashkent, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Pakhtakor Central Stadium model, North view North
  • Pakhtakor Central Stadium model, East view East
  • Pakhtakor Central Stadium model, South view South
  • Pakhtakor Central Stadium model, West view West
On a 160 mm print
15 mm
Scale
1:3,750

15 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Corner floodlight towers

    Four tapered lattice towers rise at the corners above an open bowl, with stacked lamp frames on top. Full detail keeps the lattice; print slowly so the thin shafts stay straight.

  2. Pavilion roof and gate

    A thin flat roof oversails the glazed west pavilion, and a gate is cut through the south end of the bowl. Print friendly adapts these edges; 0.12–0.16 mm layers keep them sharp.

  3. One piece with the ground

    The Pakhtakor Central Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Pakhtakor Central Stadium takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Pakhtakor Central Stadium

Pakhtakor Central Stadium is a multi-purpose ground in Tashkent, Uzbekistan, and one of the country's principal venues. It stands in Shaykhantahur District, in the middle of the city, and 35,000 fans fit inside. Pakhtakor FC plays its home games there, and the Uzbekistan national team has also used it for some matches.

Work began in 1954 and was finished in 1956, to a design by the architect Mitkhat Saghatdinovich Bulatov. Pakhtakor met Dinamo Tbilisi on August 20, 1956 in the USSR Higher League for the ground's first official match, and the first official international, against Dinamo Tirana, came on September 19 that year. It opened with room for 60,000; renovations across 1960, 1980, 1996, 2008 and 2012 cut that to 35,000.

Between 1992 and 2012 the national team's main home ground was this one; Milliy Stadium took over that role from 2013. Youth and women's national teams also play home matches there, and the ground also stages other sports, concerts and entertainment. In Soviet times it ranked among the most visited grounds of the USSR Higher League, drawing more than 60,000 fans to every match.

About this model

The Pakhtakor Central Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print