3D print Red Star Stadium
A free, printable model of Red Star Stadium, a bowl with a canopy ring and a taller roof over one side, amid the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 19 mm
- Scale
- 1:4,063
19 mm tall on a 160 mm print
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Corner masts, the tallest point
Four floodlight masts at the corners stand above everything else on the model, and they are slender. Print slowly with good cooling, and hold layers at 0.12 to 0.16 mm so they stay straight.
- Two roofs at different heights
A level canopy runs over the back rows all round, while the steel roof over the main stand sits higher with trusses on top of it. Full detail keeps the trusses and the canopy edge apart.
- One piece with the ground
Red Star Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Red Star Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Red Star Stadium
The ground stands in Dedinje, in Belgrade's municipality of Savski Venac, and serves several sports rather than football alone. Red Star Belgrade has called it home since 1963, and the club gave it the name Rajko Mitić Stadium in 2014. Its 49,167 seats make it the biggest ground in Serbia by capacity.
Work ran from 1960 to 1963. Reinforcing steel was expensive, so the venue was partly dug into the ground, and construction started 12 meters lower than the ground it replaced. More than 350,000 cubic meters of soil and 15,000 cubic meters of stone came out, and on the east side, where the deep foundation would not work, soil was brought in instead. The opening on September 1, 1963, a league match against NK Rijeka, drew about 55,000 through 9 gates.
With the work finished the ground held 110,000 and acquired its nickname, Marakana, borrowed from the Brazilian stadium. That autumn a derby with Partizan Belgrade brought 108,000. The final of the European Cup was played there in 1973, and the finals of the UEFA European Championship in 1976. Standing was ended in the mid-1990s under UEFA's demands for comfort and security, leaving 60,000 seats, and the renaming in December 2014 honored Rajko Mitić, a former player for the club.
About this model
Red Star Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
