A white 3D print of Sitterstadion, showing its low rounded roof around an open field among surrounding buildings.

Sitterstadion in 3D

Sitterstadion appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Sitterstadion model, North view North
  • Sitterstadion model, East view East
  • Sitterstadion model, South view South
  • Sitterstadion model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Sitterstadion may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
6 mm
Scale
1:3,750

6 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open roof and steep bowl

    A low rounded roof frames a rectangular opening over a single steep seating bowl. Print friendly keeps the exposed columns and thin canopy edge legible.

  2. Roof solar banks

    Repeated rectangular panels sit on the roof runs. At small print sizes, Full detail preserves their divisions better than Print friendly.

  3. One piece with the ground

    Sitterstadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sitterstadion takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Sitterstadion

Sitterstadion is a multipurpose stadium in St. Gallen, Switzerland. It opened in 2008 and is the home ground of FC St. Gallen 1879. The club moved there from its former home at Espenmoos. Capacity is 20,660 for domestic games and 17,317 for internationals.

The stadium is officially named Berit Sitterstadion for sponsorship reasons. It carried the AFG Arena name from 2008 to 2016, when it was renamed Kybunpark, before becoming Sitterstadion in July 2026. Beyond club football, it has hosted international fixtures with teams including Brazil and Spain.

The stadium roof holds St. Gallen's largest solar-electric power plant, installed in 2015 with a peak capacity of 633 kW. FC Wil, a second-division club, shared the ground from July 2012 while it built a new stadium.

About this model

Sitterstadion is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits