3D print Stade du Hainaut
A free, printable 3D model of Stade du Hainaut, generated from real map data in your browser, with the surrounding streets and buildings of Valenciennes.
-
North
-
East
-
South
-
West
The model you print
Stade du Hainaut in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rounded shell and roof opening
The stadium is wrapped in a continuous curved shell around a large roof opening. Full detail keeps the cladding and roof lip; Print friendly simplifies the fine joint relief.
- Tiers and entrance hoods
Two stepped seating tiers sit below the shell, with a paneled west frontage. A larger print or fine layers keep these recesses readable.
- One piece with the ground
Stade du Hainaut is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stade du Hainaut takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stade du Hainaut
In Valenciennes, France, Stade du Hainaut serves several uses. Football is the main one, and Valenciennes FC plays its home games there. It took over from Stade Nungesser as the club's home. The ground holds 25,172 spectators for football.
Construction cost a total of 75 million euros. It has 16 luxury boxes and 2,600 club seats. Two large video screens measure 48 square meters each, and the roof alone uses 1,800 tons of steel. Concerts can raise capacity to 35,000.
The ground opened on the evening of July 26, 2011, with a friendly against Borussia Dortmund. Dortmund won 1–0 in front of a club-record 22,778 spectators. Matches of the 2019 Women's World Cup were played there.
About this model
Stade du Hainaut is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
