3D print 2121 Avenue of the Stars
A free, printable model of 2121 Avenue of the Stars, formerly Fox Plaza, a tall tower among the streets and buildings of Century City around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 150 m
- On a 160 mm print
- 41 mm
- Scale
- 1:3,750
150 m of 2121 Avenue of the Stars, 41 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the block larger
The model is a single tall mass, and its height is what reads first. Print it larger so the walls stay straight, and set layers to 0.12 to 0.16 mm.
- Slow the top layers
The top is a broad flat roof. Slow the print and keep cooling on as it closes, and choose Full detail for a large print.
- One piece with the ground
2121 Avenue of the Stars is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 2121 Avenue of the Stars takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 2121 Avenue of the Stars
Fox Plaza was the building's earlier name; it is a skyscraper of 34 stories in Century City, Los Angeles, owned by the Irvine Company. Marvin Davis, the developer, kept the land when he sold the 20th Century Fox studio next door to Rupert Murdoch in 1985, and the tower was completed in 1987.
Scott Johnson was the principal design architect; he was a founding design partner of the firm Johnson Fain. Rust-red granite and glass panels make up the exterior. Cooling and ventilation use a tall vertical shaft through the core: outdoor air enters at the bottom and is pushed to a fan room on every floor, while stale air leaves through a rooftop exhaust, an application of the stack effect.
Ronald Reagan kept offices on the 34th floor for several years after he left public office. Fox has used the building in at least four major films; the best known is the 1988 action movie Die Hard, in which the unfinished tower plays the fictional Nakatomi Plaza. Its chief engineer has remarked on the many redundancies in the design, and suggests that they may reflect its intended use as a filming location.
About this model
2121 Avenue of the Stars is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
